Fixes & Features

What changed in RaceVisor, newest first: every fix and every new feature, and what it means when you race.

What changed in RaceVisor, newest first. Each entry says what was wrong or what is new, and what it means when you race. RaceVisor builds are dated, not numbered: the download is rebuilt and re-signed as these land, so the newest download always has everything below.

Get the fixes. Download RaceVisor again from the Downloads section; it replaces the old one. Your layouts and settings are kept.

2026-11-16#

New: the pit plan goes in as you enter pit road#

Turn on Pit plan on pit entry in AI settings and RaceVisor sends the pit plan the moment the car drives onto pit road: fuel to the finish, worn tyres, repair, tearoff, without being asked. It fires once per stop and leaves a pit request you already made alone. Off until you turn it on. Details in Controls → Pit Stop Planner.

New: oval fuel covers a green-white-checkered finish#

On an oval race counted in laps with full-course cautions, fuel to the finish now carries 4.5 extra laps for overtime, enough for a four-lap overtime at racing pace. It is in the planner, the pit request and the pit-entry plan. iRacing can list no overtime for a race that then runs over, so it is carried either way.

New: ask about the setup, the stint, and your recorded runs#

Three new things to ask the chat, typed or spoken:

  1. "What should I change on the setup" - it reads the setup loaded in the car (iRacing) and answers with a numbered list of changes: present value, new value, why. You make them in the garage.
  1. "How long will this tank last" - laps on a full tank, laps left in it, fuel to the finish and stops still needed.
  1. "Look at my last run" - it reads the sim's own telemetry recordings: lap table, clean-lap pace, fuel per lap, fall-off over the longest green run, tyre readings at each stop and the setup that run used.

New: Pedal Curve widget#

Draws the throttle curve a pedal-mapping program is applying, with a live dot at the throttle the sim reports. It works with PedalMapper, a separate program on the author's rig that is not offered for download; elsewhere it says so. Details in Controls → Pedal Curve widget.

2026-10-24#

New: an on/off key for every widget#

Open the Hotkey Editor. A new WIDGETS ON / OFF section lists every widget in your layout, each with its own key and wheel-button slot. Press it and that widget is gone from the screen, the clicks and the headset; press it again and it is back. The key works in every layout that has that widget. The Kneeboard Position widget also has its own slot in the KNEEBOARD section. The Find box lists Widget ON / OFF for each widget too, so one can be brought back without a key.

New: set any widget's on/off key from its own right-click menu#

Right-click a widget, pick Set on/off hotkey, then press the key or wheel button you want within 10 seconds (Esc cancels). Clear its on/off hotkey removes it, and Switch this widget off turns it off right there. Window Portals and Webcams each get their own key, told apart by the window or camera they show; before this fix every portal shared one key and they all hid together.

Change: a widget's right-click menu closes after you pick something#

Pick an item and the menu closes. Undo last change is the exception: it leaves the menu open so you can undo again. Other in-overlay menus stay open as before.

Fix: the pointer sat on the text you just pasted#

After a paste into a Window Portal (a chat box, an editor), the drawn pointer stayed right on the pasted text. It now hides until you move the mouse a few pixels.

The Quest Face Sensor Off watcher in the launcher scripts re-sent its command every 5 minutes, and those re-sends ended Link sessions. Download the launcher scripts again and re-run the installer. Details in Pit Notes.

2026-10-20#

New: headset screenshots from the car, and a car-setup shot with nothing in the way#

The 📷 button on the Control Bar saves what the headset shows right now: the true frame from the OpenXR layer (every overlay where it sits), or a mirror window. Left eye by default; crop it with a box drawn on the frozen frame in the headset. The new 🚗 button next to it takes the sim only: the kneeboard and RaceVisor's VR groups step aside for the instant of the shot, so a car setup screen or the garage comes out clean. Settings → Overlays in it sets what the plain camera includes. Details in Controls → Headset screenshot.

New: get a picture into a chat without taking the headset off#

Right-click any Window Portal (no Ctrl needed any more): Capture this window at full detail saves the real window, sharp text and all; Paste image PATH here clicks the spot you right-clicked and pastes the capture's full path as text; Paste the PICTURE here pastes the image itself for a browser or a drop box. Every capture puts its path on the clipboard, never the picture, so a paste costs a few characters.

Fix: the dash sat way above your head at every start#

The layer took its origin at its very first frame - wherever the headset was at that instant, on the desk or in your hand. It now waits until the headset is worn and your head has been still for 1.5 s. And once per session load, the first time the car is on track, RaceVisor recentres the kneeboard and the widgets itself (Settings → Recenter the kneeboard and widgets when the car gets on track, on by default). Nothing to press.

Fix: checkable menu items that would not uncheck#

Show background and a few other ticks flipped twice per click, so the tick never moved and the second click re-applied the same state. One click, one change, everywhere.

Fix: the FloDee widget said "no remote control" with FloDee running#

Every ping got its answer and then threw it away while closing the pipe. Fixed; the widget also waits for three missed pings in a row before saying anything, and then says not answering, not update.

New: FloDee's panels in the headset#

Right-click the FloDee widget → Show FloDee's panels here adds a portal that follows whichever FloDee window is open (palette, ruler, snippets), clicks going through. Offered only when FloDee is installed.

2026-10-15#

Fix: Window Portal clicks now reach a browser, including a YouTube video#

A Window Portal with Click through to the window on is meant to pass your clicks to the real window behind it. With a browser in the portal, three things went wrong. They are all fixed, on the monitor and in the headset:

2026-10-13#

New: Window Portal click-through is on by default#

New Window Portals pass clicks to their window from the start. Hold Ctrl and click to move the widget. Portals you already have keep their own setting.

Fix: VR quad groups did not appear under SteamVR#

SteamVR refused the picture format RaceVisor asked for, so no quad showed in the headset. It now picks a format the headset runtime accepts.

Fix: the headset part of RaceVisor stayed on an old version#

The small headset layer that draws quad groups kept loading an older copy until it was installed again by hand. RaceVisor now updates it by itself every time it starts.

Known limit: use quad groups or the kneeboard, not both#

With both on, a RaceVisor quad can draw in front of the kneeboard even when it is further away. This was tested on SteamVR and on the Meta runtime with the drawing order reversed, and the headset ignored the order both times. Until that changes, use one or the other.

Rig Doctor#

2026-10-12#

Change: the FloDee widget is switched off#

It was using up to 43% of the graphics card. It no longer draws and is not in the widget lists or the presets. The preset that used it shows the clock in its place.

Fix (Rig Doctor): the Live tab's big numbers were unreadable#

The GPU, CPU, link and sim numbers were black on the dark cards. They are now light.

2026-10-07#

Fix: Track Pioneers moved to a new server address#

Builds from before this date cannot send the tracks you learn to the shared library. Download RaceVisor again to keep contributing.

2026-10-05#

New: Steering vs g, and the steering bar#

2026-09-23#

New: Webcam widget#

New: recording with timers#

The Media widget, the Webcam widget and the OBS panel share one set of recording options: a countdown before recording starts, a set recording length that stops and saves by itself, and Save or Save as when it finishes.

New: more control over rev and g meters#

Fix: text outlines and shadows#

Outlined text had jagged corners and a grey edge, and drop shadows were not drawn at all. Outlines are now smooth, and shadows draw with an angle and distance you can set.

Fix: bar colours#

Gradient bars now run across the whole scale by default, so red only shows near the top and a half-full bar is green. The old behaviour, where the colours stretch over the filled part, is an option.

Fixes in the layout editor#

Other changes#

2026-09-22#

New: g-force bars, rotation, and bar styling#

2026-09-20#

Fix: overlapping widgets in the layout designer#

When widgets were stacked, it was hard to get at the one underneath. The designer now lists every widget so you can pick one from the list, you can lock a widget so clicks pass through it, Tab moves to the next one, and Esc lets go.